Mailing List CGatePro@mail.stalker.com Message #92537
From: Communigate Forum <communigate@communik8.net>
Subject: Re: Linksys SPA3102 (Success!)
Date: Mon, 10 Sep 2007 13:44:24 +0100
To: CommuniGate Pro Discussions <CGatePro@mail.stalker.com>
thanks very much for the info!!

will try out as soon as i get time..

rup

freddy.frouin@bt.com wrote:
> Hello all,
>
> I'm finally successful to use a CGPro SIP Account for inbound and outbound calls going through the SPA3102 device.
>
> I wrote kind of HowTo to document this, please find it there:
> http://freddy.linuxtribe.fr/blog/Linksys3102withCGProHowTo.v1.html
>
> Best Regards, Freddy.
>
>  
>> -----Original Message-----
>> From: CommuniGate Pro Discussions
>> [mailto:CGatePro@mail.stalker.com] On Behalf Of Technical Support
>> Sent: lundi 3 septembre 2007 20:16
>> To: CommuniGate Pro Discussions
>> Subject: Re: Linksys SPA3102 (Success!)
>>
>> Hello,
>>
>> freddy.frouin@bt.com wrote:
>>    
>>> Hello everyone,
>>>
>>> Well, I'm interested with what you said in this thread, I'd
>>>      
>> like to get more details about it. Where you able to manage
>> all your calls, incoming and outgoing calls, from a CGPro account ?
>>    
>>> I'm now able to place and receive calls from the LINE1 RJ11
>>>      
>> port. I'm able as well to forward incoming calls to LINE1 to
>> an SIP account on the CGPro server using the User LINE1
>> settings. Yet, I'm still unable to place a call from a
>> SIP/CGPro account to the SPA3102.
>>
>> Note that the FXS account in Sipura 3102 uses a different port
>> number by default (5061, if my memory serves). You need to
>> relay requests from CGPro (better - through gatewaycaller
>> script) to that port. Sending request on the standard port
>> 5060 would give you some error (403 Forbidden, I believe.)
>>
>>    
>>> I tried to configure the WAN interface instead of using the
>>>      
>> LAN one, because I finished to think the SIP gateway was maybe
>> only available on the WAN interface... ? I do not need to use
>> the WAN interface 'cause I already have another router... But
>> when I switch to the WAN interface, the management interface
>> is no more available, neither in HTTP, nor in HTTPS...
>>
>> That's on WAN settings page (which you need to access while
>> connected through the LAN port): Enable WAN Web Server: -- set
>> that to yes. And we connect the device to the office network
>> through its WAN port.
>>
>>    
>>> Any help would be appreciated,
>>> Best Regards, Freddy.
>>>
>>>      
>>>> -----Original Message-----
>>>> From: CommuniGate Pro Discussions
>>>> [mailto:CGatePro@mail.stalker.com] On Behalf Of Ifan Jones
>>>> Sent: lundi 13 août 2007 12:34
>>>> To: CommuniGate Pro Discussions
>>>> Subject: Re: Linksys SPA3102 (Success!)
>>>>
>>>> I just completed a successful pstn - SIP call through the SPA 3102
>>>>
>>>> The SPA has two network ports as it has a built in router -
>>>>        
>> I didn't
>>    
>>>> need this so I enabled the WAN side (marked inernet) management,
>>>> assigned a static IP, and disconnected the LAN side (marked
>>>> ethernet), and hey presto everything came to life!
>>>>
>>>> I'll be documenting this soon and will post my settings and configs
>>>> for others to use.
>>>>
>>>> Regards
>>>>
>>>> Ifan Jones
>>>> Solet Ltd
>>>>
>>>> w: www.solet.co.uk
>>>> e: ifan@solet.co.uk
>>>> t: 08701995007
>>>>
>>>> sip: 201@soletsupport.co.uk
>>>>
>>>> On Monday, Aug. 13, 2007 at 8:22
>>>>  "Ifan Jones"  wrote:
>>>>
>>>>        
>>>>> :-)  I agree - the doumentation is awful, perhaps once we get
>>>>>          
>>>> these working we should provide a guide!
>>>>        
>>>>> Ifan Jones
>>>>> Solet Ltd
>>>>>
>>>>> w: www.solet.co.uk
>>>>> e: ifan@solet.co.uk
>>>>> t: 08701995007
>>>>>
>>>>> sip: 201@soletsupport.co.uk
>>>>>
>>>>> On Monday, Aug. 13, 2007 at 8:33
>>>>>  freddy.frouin@bt.com wrote:
>>>>>
>>>>>          
>>>>>> So, I finally tried it but not successfully for the moment:
>>>>>> - I had some problem to connect it to the french PTSN,
>>>>>>            
>>>> if someone has any details about this, would be interesting.
>>>> It's maybe a boring issue, don't know...
>>>>        
>>>>>> - I don't find out detailed documentation about the
>>>>>>            
>>>> SPA3102. Manufacturer documentation is really poor compared to all
>>>> available options.
>>>>        
>>>>>> - I was able to make it authenticate using SIP to CGPro
>>>>>>            
>>>> server. But then, I would like another users of the CGP
>>>>        
>> server to be
>>    
>>>> able to access the PTSN through this user, but I still
>>>>        
>> don't know if
>>    
>>>> it will be possible to do so.
>>>>        
>>>>>> - My first idea was to access the SPA3102 as a media
>>>>>>            
>>>> gateway configuring an SIP gateway in CGPro and to route
>>>>        
>> calls to it,
>>    
>>>> but from what I look to understand of the SPA3102 config I
>>>>        
>> think it's
>>    
>>>> a wrong way, it won't allow such configuration. Did someone ever
>>>> tried this ?
>>>>        
>>>>>> Thanks,
>>>>>> Best Regards, Freddy.
>>>>>>
>>>>>>            
>>>>>>> -----Original Message-----
>>>>>>> From: CommuniGate Pro Discussions
>>>>>>>              
>>>> [mailto:CGatePro@mail.stalker.com]
>>>>        
>>>>>>> On Behalf Of Ifan Jones
>>>>>>> Sent: mercredi 8 août 2007 18:54
>>>>>>> To: CommuniGate Pro Discussions
>>>>>>> Subject: Linksys SPA3102
>>>>>>>
>>>>>>> Hi All
>>>>>>>
>>>>>>> This is the newer version of the SPA3000 - anyone here had
>>>>>>>              
>>>> the honour of setting one up for CGPro?
>>>>        
>>>>>>> Ifan Jones
>>>>>>> Solet Ltd
>>>>>>>
>>>>>>> w: www.solet.co.uk
>>>>>>> e: ifan@solet.co.uk
>>>>>>> t: 08701995007
>>>>>>>
>>>>>>> sip: 201@soletsupport.co.uk
>>>>>>>
>>>>>>> #############################################################
>>>>>>> This message is sent to you because you are subscribed to  the
>>>>>>> mailing list <CGatePro@mail.stalker.com>.
>>>>>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com>
>>>>>>>              
>>>> To switch
>>>>        
>>>>>>> to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>>>>>>> To switch to the INDEX mode, E-mail to
>>>>>>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>>>>>>> <CGatePro-request@mail.stalker.com>
>>>>>>>
>>>>>>>              
>>>>>> #############################################################
>>>>>> This message is sent to you because you are subscribed to  the
>>>>>> mailing list <CGatePro@mail.stalker.com>.
>>>>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To
>>>>>> switch to the DIGEST mode, E-mail to
>>>>>> <CGatePro-digest@mail.stalker.com>
>>>>>> To switch to the INDEX mode, E-mail to
>>>>>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>>>>>> <CGatePro-request@mail.stalker.com>
>>>>>>            
>>>>> #############################################################
>>>>> This message is sent to you because you are subscribed to  the
>>>>> mailing list <CGatePro@mail.stalker.com>.
>>>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To
>>>>>          
>>>> switch to
>>>>        
>>>>> the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>>>>> To switch to the INDEX mode, E-mail to
>>>>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>>>>> <CGatePro-request@mail.stalker.com>
>>>>>          
>>>> #############################################################
>>>> This message is sent to you because you are subscribed to  the
>>>> mailing list <CGatePro@mail.stalker.com>.
>>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com>
>>>>        
>> To switch
>>    
>>>> to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>>>> To switch to the INDEX mode, E-mail to
>>>> <CGatePro-index@mail.stalker.com> Send administrative queries to  
>>>> <CGatePro-request@mail.stalker.com>
>>>>
>>>>        
>>> #############################################################
>>> This message is sent to you because you are subscribed to
>>>   the mailing list <CGatePro@mail.stalker.com>.
>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To switch
>>> to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>>> To switch to the INDEX mode, E-mail to
>>> <CGatePro-index@mail.stalker.com> Send administrative queries to  
>>> <CGatePro-request@mail.stalker.com>
>>>      
>> --
>> Best regards,
>> Dmitry Akindinov
>>
>> =======================================================================
>> When answering to letters sent to you by the tech.support
>> staff, make sure the original message you have received is
>> included into your reply.
>>
>>
>> #############################################################
>> This message is sent to you because you are subscribed to
>>  the mailing list <CGatePro@mail.stalker.com>.
>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To
>> switch to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>> To switch to the INDEX mode, E-mail to
>> <CGatePro-index@mail.stalker.com> Send administrative queries
>> to  <CGatePro-request@mail.stalker.com>
>>
>>    
>
> #############################################################
> This message is sent to you because you are subscribed to
>   the mailing list <CGatePro@mail.stalker.com>.
> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com>
> To switch to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
> To switch to the INDEX mode, E-mail to <CGatePro-index@mail.stalker.com>
> Send administrative queries to  <CGatePro-request@mail.stalker.com>
>  
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster