Mailing List CGatePro@mail.stalker.com Message #92536
From: <freddy.frouin@bt.com>
Subject: RE: Linksys SPA3102 (Success!)
Date: Mon, 10 Sep 2007 13:35:12 +0100
To: <CGatePro@mail.stalker.com>
Hello all,

I'm finally successful to use a CGPro SIP Account for inbound and outbound calls going through the SPA3102 device.

I wrote kind of HowTo to document this, please find it there:
http://freddy.linuxtribe.fr/blog/Linksys3102withCGProHowTo.v1.html

Best Regards, Freddy.

>-----Original Message-----
>From: CommuniGate Pro Discussions
>[mailto:CGatePro@mail.stalker.com] On Behalf Of Technical Support
>Sent: lundi 3 septembre 2007 20:16
>To: CommuniGate Pro Discussions
>Subject: Re: Linksys SPA3102 (Success!)
>
>Hello,
>
>freddy.frouin@bt.com wrote:
>> Hello everyone,
>>
>> Well, I'm interested with what you said in this thread, I'd
>like to get more details about it. Where you able to manage
>all your calls, incoming and outgoing calls, from a CGPro account ?
>>
>> I'm now able to place and receive calls from the LINE1 RJ11
>port. I'm able as well to forward incoming calls to LINE1 to
>an SIP account on the CGPro server using the User LINE1
>settings. Yet, I'm still unable to place a call from a
>SIP/CGPro account to the SPA3102.
>
>Note that the FXS account in Sipura 3102 uses a different port
>number by default (5061, if my memory serves). You need to
>relay requests from CGPro (better - through gatewaycaller
>script) to that port. Sending request on the standard port
>5060 would give you some error (403 Forbidden, I believe.)
>
>> I tried to configure the WAN interface instead of using the
>LAN one, because I finished to think the SIP gateway was maybe
>only available on the WAN interface... ? I do not need to use
>the WAN interface 'cause I already have another router... But
>when I switch to the WAN interface, the management interface
>is no more available, neither in HTTP, nor in HTTPS...
>
>That's on WAN settings page (which you need to access while
>connected through the LAN port): Enable WAN Web Server: -- set
>that to yes. And we connect the device to the office network
>through its WAN port.
>
>> Any help would be appreciated,
>> Best Regards, Freddy.
>>
>>> -----Original Message-----
>>> From: CommuniGate Pro Discussions
>>> [mailto:CGatePro@mail.stalker.com] On Behalf Of Ifan Jones
>>> Sent: lundi 13 août 2007 12:34
>>> To: CommuniGate Pro Discussions
>>> Subject: Re: Linksys SPA3102 (Success!)
>>>
>>> I just completed a successful pstn - SIP call through the SPA 3102
>>>
>>> The SPA has two network ports as it has a built in router -
>I didn't
>>> need this so I enabled the WAN side (marked inernet) management,
>>> assigned a static IP, and disconnected the LAN side (marked
>>> ethernet), and hey presto everything came to life!
>>>
>>> I'll be documenting this soon and will post my settings and configs
>>> for others to use.
>>>
>>> Regards
>>>
>>> Ifan Jones
>>> Solet Ltd
>>>
>>> w: www.solet.co.uk
>>> e: ifan@solet.co.uk
>>> t: 08701995007
>>>
>>> sip: 201@soletsupport.co.uk
>>>
>>> On Monday, Aug. 13, 2007 at 8:22
>>>  "Ifan Jones"  wrote:
>>>
>>>> :-)  I agree - the doumentation is awful, perhaps once we get
>>> these working we should provide a guide!
>>>> Ifan Jones
>>>> Solet Ltd
>>>>
>>>> w: www.solet.co.uk
>>>> e: ifan@solet.co.uk
>>>> t: 08701995007
>>>>
>>>> sip: 201@soletsupport.co.uk
>>>>
>>>> On Monday, Aug. 13, 2007 at 8:33
>>>>  freddy.frouin@bt.com wrote:
>>>>
>>>>> So, I finally tried it but not successfully for the moment:
>>>>> - I had some problem to connect it to the french PTSN,
>>> if someone has any details about this, would be interesting.
>>> It's maybe a boring issue, don't know...
>>>>> - I don't find out detailed documentation about the
>>> SPA3102. Manufacturer documentation is really poor compared to all
>>> available options.
>>>>> - I was able to make it authenticate using SIP to CGPro
>>> server. But then, I would like another users of the CGP
>server to be
>>> able to access the PTSN through this user, but I still
>don't know if
>>> it will be possible to do so.
>>>>> - My first idea was to access the SPA3102 as a media
>>> gateway configuring an SIP gateway in CGPro and to route
>calls to it,
>>> but from what I look to understand of the SPA3102 config I
>think it's
>>> a wrong way, it won't allow such configuration. Did someone ever
>>> tried this ?
>>>>> Thanks,
>>>>> Best Regards, Freddy.
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: CommuniGate Pro Discussions
>>> [mailto:CGatePro@mail.stalker.com]
>>>>>> On Behalf Of Ifan Jones
>>>>>> Sent: mercredi 8 août 2007 18:54
>>>>>> To: CommuniGate Pro Discussions
>>>>>> Subject: Linksys SPA3102
>>>>>>
>>>>>> Hi All
>>>>>>
>>>>>> This is the newer version of the SPA3000 - anyone here had
>>> the honour of setting one up for CGPro?
>>>>>>
>>>>>>
>>>>>> Ifan Jones
>>>>>> Solet Ltd
>>>>>>
>>>>>> w: www.solet.co.uk
>>>>>> e: ifan@solet.co.uk
>>>>>> t: 08701995007
>>>>>>
>>>>>> sip: 201@soletsupport.co.uk
>>>>>>
>>>>>> #############################################################
>>>>>> This message is sent to you because you are subscribed to  the
>>>>>> mailing list <CGatePro@mail.stalker.com>.
>>>>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com>
>>> To switch
>>>>>> to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>>>>>> To switch to the INDEX mode, E-mail to
>>>>>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>>>>>> <CGatePro-request@mail.stalker.com>
>>>>>>
>>>>> #############################################################
>>>>> This message is sent to you because you are subscribed to  the
>>>>> mailing list <CGatePro@mail.stalker.com>.
>>>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To
>>>>> switch to the DIGEST mode, E-mail to
>>>>> <CGatePro-digest@mail.stalker.com>
>>>>> To switch to the INDEX mode, E-mail to
>>>>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>>>>> <CGatePro-request@mail.stalker.com>
>>>> #############################################################
>>>> This message is sent to you because you are subscribed to  the
>>>> mailing list <CGatePro@mail.stalker.com>.
>>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To
>>> switch to
>>>> the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>>>> To switch to the INDEX mode, E-mail to
>>>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>>>> <CGatePro-request@mail.stalker.com>
>>> #############################################################
>>> This message is sent to you because you are subscribed to  the
>>> mailing list <CGatePro@mail.stalker.com>.
>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com>
>To switch
>>> to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>>> To switch to the INDEX mode, E-mail to
>>> <CGatePro-index@mail.stalker.com> Send administrative queries to  
>>> <CGatePro-request@mail.stalker.com>
>>>
>>
>> #############################################################
>> This message is sent to you because you are subscribed to
>>   the mailing list <CGatePro@mail.stalker.com>.
>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To switch
>> to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>> To switch to the INDEX mode, E-mail to
>> <CGatePro-index@mail.stalker.com> Send administrative queries to  
>> <CGatePro-request@mail.stalker.com>
>
>--
>Best regards,
>Dmitry Akindinov
>
>=======================================================================
>When answering to letters sent to you by the tech.support
>staff, make sure the original message you have received is
>included into your reply.
>
>
>#############################################################
>This message is sent to you because you are subscribed to
>  the mailing list <CGatePro@mail.stalker.com>.
>To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To
>switch to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>To switch to the INDEX mode, E-mail to
><CGatePro-index@mail.stalker.com> Send administrative queries
>to  <CGatePro-request@mail.stalker.com>
>
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster