Mailing List CGatePro@mail.stalker.com Message #92439
From: <freddy.frouin@bt.com>
Subject: RE: Linksys SPA3102 (Success!)
Date: Tue, 4 Sep 2007 14:14:41 +0100
To: <CGatePro@mail.stalker.com>
Hello,

Thanks for these details, I was able to go further with this information.

I've got a good news as well, I found some Cisco doc which details most of the SPA3102 options. I'm not sure I'm allowed to post it in this mailing list, so just ask me or if mailing list moderators accept it, I may post it there... Just let me know.

Then, I still have a problem:
- I'm login to CGPro with some account@domain (which is not the main domain of my cgp server)
- I've created a pbx@domain account with the privileges it was required to have as "Can access all files" and "Can Impersonate" and I added some call rules: redirected to #pbx.
- I've modified the router gatewaycaller rules to:
S:<*@pstn>    = gatewaycaller{*}#pbx@domain ; start 'gatewaycaller' app
- I've modifyed PTSN account default in order to forward calls to the SPA3102.

Finally, when I try to make a PTSN call, the SPA3102 box answer with the 410 SIP code: "Gone" as shown in CGP Logs:

14:25:57.557 5 SIP [0.0.0.0]:5060 -> [spa3102IP]:5061 out(401): ACK sip:+somephonenumber@spa3102IP SIP/2.0\r\nP-Asserted-Identity: <sip:...
14:25:57.557 2 SIPC-000072 [001424] ACK sip:+somephonenumber@spa3102IP sent [cgproserverIP]:5060 -> udp [spa3102IP]:5061
14:25:57.557 5 SIPC-000072 timeout set for 32 secs
14:25:57.557 5 SIPC(1) 000072: enqueued (32 secs)
14:25:57.557 5 SIGNAL(2) 000630: processing FINAL
14:25:57.557 2 SIGNAL-000630 410 received from SIPC-000072
14:25:57.557 4 SIGNAL-000630 collected code=410
14:25:57.557 2 SIGNAL-000630 410 relaying
14:25:57.557 2 PBXLEG-000122 bridge-start rejected(410-Gone)
14:25:57.557 2 PBXLEG-000122 program stopped
14:25:57.557 2 PBXLEG-000122 finishing
14:25:57.557 2 PBXLEG-000122 dequeued
14:25:57.557 1 PBXLEG-000120 bridge-start rejected by Peer. Error Code=410-Gone->Gone
14:25:57.557 1 PBXLEG-000120 bridge response error: Error Code=Gone
14:25:57.557 2 PBXLEG-000120 bridge-destroy sending
14:25:57.557 2 PBXLEG-000120 ProgramLog: "call failed: errorCode=410-Gone"
14:25:57.558 4 SIGNAL-000630 cancelling all
14:25:57.558 5 SIGNAL(2) 000630: killing
14:25:57.558 2 SIGNAL-000630 dequeued
14:25:57.564 5 SIGNAL-000628 FINAL posted
14:25:57.564 2 PBXLEG-000120 rejecting done
14:25:57.564 2 PBXLEG-000120 program stopped
14:25:57.564 2 PBXLEG-000120 finishing
14:25:57.564 2 PBXLEG-000120 dequeued

Does someone have any idea of what's going wrong ?

I tried to make a call configuring my SIP client to directly access the SPA3102 and I've got exactly the same SIP return code when I try to place a call. So I'm not sure it's an issue with my CGP setup, but I'm not sure with it as well...

Thanks,
Best Regards, Freddy.

>-----Original Message-----
>From: CommuniGate Pro Discussions
>[mailto:CGatePro@mail.stalker.com] On Behalf Of Technical Support
>Sent: lundi 3 septembre 2007 20:16
>To: CommuniGate Pro Discussions
>Subject: Re: Linksys SPA3102 (Success!)
>
>Hello,
>
>freddy.frouin@bt.com wrote:
>> Hello everyone,
>>
>> Well, I'm interested with what you said in this thread, I'd
>like to get more details about it. Where you able to manage all your
>calls, incoming and outgoing calls, from a CGPro account ?
>>
>> I'm now able to place and receive calls from the LINE1 RJ11
>port. I'm able as well to forward incoming calls to LINE1 to an SIP
>account on the CGPro server using the User LINE1 settings. Yet, I'm
>still unable to place a call from a SIP/CGPro account to the SPA3102.
>
>Note that the FXS account in Sipura 3102 uses a different port number
>by default (5061, if my memory serves). You need to relay requests from
>CGPro (better - through gatewaycaller
>script) to that port. Sending request on the standard port 5060 would
>give you some error (403 Forbidden, I believe.)
>
>> I tried to configure the WAN interface instead of using the
>LAN one, because I finished to think the SIP gateway was maybe only
>available on the WAN interface... ? I do not need to use the WAN
>interface 'cause I already have another router... But when I switch to
>the WAN interface, the management interface is no more available,
>neither in HTTP, nor in HTTPS...
>
>That's on WAN settings page (which you need to access while connected
>through the LAN port): Enable WAN Web Server: -- set that to yes. And
>we connect the device to the office network through its WAN port.
>
>> Any help would be appreciated,
>> Best Regards, Freddy.
>>
>>> -----Original Message-----
>>> From: CommuniGate Pro Discussions
>>> [mailto:CGatePro@mail.stalker.com] On Behalf Of Ifan Jones
>>> Sent: lundi 13 août 2007 12:34
>>> To: CommuniGate Pro Discussions
>>> Subject: Re: Linksys SPA3102 (Success!)
>>>
>>> I just completed a successful pstn - SIP call through the SPA 3102
>>>
>>> The SPA has two network ports as it has a built in router -
>I didn't
>>> need this so I enabled the WAN side (marked inernet) management,
>>> assigned a static IP, and disconnected the LAN side (marked
>>> ethernet), and hey presto everything came to life!
>>>
>>> I'll be documenting this soon and will post my settings and configs
>>> for others to use.
>>>
>>> Regards
>>>
>>> Ifan Jones
>>> Solet Ltd
>>>
>>> w: www.solet.co.uk
>>> e: ifan@solet.co.uk
>>> t: 08701995007
>>>
>>> sip: 201@soletsupport.co.uk
>>>
>>> On Monday, Aug. 13, 2007 at 8:22
>>>  "Ifan Jones"  wrote:
>>>
>>>> :-)  I agree - the doumentation is awful, perhaps once we get
>>> these working we should provide a guide!
>>>> Ifan Jones
>>>> Solet Ltd
>>>>
>>>> w: www.solet.co.uk
>>>> e: ifan@solet.co.uk
>>>> t: 08701995007
>>>>
>>>> sip: 201@soletsupport.co.uk
>>>>
>>>> On Monday, Aug. 13, 2007 at 8:33
>>>>  freddy.frouin@bt.com wrote:
>>>>
>>>>> So, I finally tried it but not successfully for the moment:
>>>>> - I had some problem to connect it to the french PTSN,
>>> if someone has any details about this, would be interesting.
>>> It's maybe a boring issue, don't know...
>>>>> - I don't find out detailed documentation about the
>>> SPA3102. Manufacturer documentation is really poor compared to all
>>> available options.
>>>>> - I was able to make it authenticate using SIP to CGPro
>>> server. But then, I would like another users of the CGP
>server to be
>>> able to access the PTSN through this user, but I still
>don't know if
>>> it will be possible to do so.
>>>>> - My first idea was to access the SPA3102 as a media
>>> gateway configuring an SIP gateway in CGPro and to route
>calls to it,
>>> but from what I look to understand of the SPA3102 config I
>think it's
>>> a wrong way, it won't allow such configuration. Did someone ever
>>> tried this ?
>>>>> Thanks,
>>>>> Best Regards, Freddy.
>>>>>
>>>>>> -----Original Message-----
>>>>>> From: CommuniGate Pro Discussions
>>> [mailto:CGatePro@mail.stalker.com]
>>>>>> On Behalf Of Ifan Jones
>>>>>> Sent: mercredi 8 août 2007 18:54
>>>>>> To: CommuniGate Pro Discussions
>>>>>> Subject: Linksys SPA3102
>>>>>>
>>>>>> Hi All
>>>>>>
>>>>>> This is the newer version of the SPA3000 - anyone here had
>>> the honour of setting one up for CGPro?
>>>>>>
>>>>>>
>>>>>> Ifan Jones
>>>>>> Solet Ltd
>>>>>>
>>>>>> w: www.solet.co.uk
>>>>>> e: ifan@solet.co.uk
>>>>>> t: 08701995007
>>>>>>
>>>>>> sip: 201@soletsupport.co.uk
>>>>>>
>>>>>> #############################################################
>>>>>> This message is sent to you because you are subscribed to  the
>>>>>> mailing list <CGatePro@mail.stalker.com>.
>>>>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com>
>>> To switch
>>>>>> to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>>>>>> To switch to the INDEX mode, E-mail to
>>>>>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>>>>>> <CGatePro-request@mail.stalker.com>
>>>>>>
>>>>> #############################################################
>>>>> This message is sent to you because you are subscribed to  the
>>>>> mailing list <CGatePro@mail.stalker.com>.
>>>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To
>>>>> switch to the DIGEST mode, E-mail to
>>>>> <CGatePro-digest@mail.stalker.com>
>>>>> To switch to the INDEX mode, E-mail to
>>>>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>>>>> <CGatePro-request@mail.stalker.com>
>>>> #############################################################
>>>> This message is sent to you because you are subscribed to  the
>>>> mailing list <CGatePro@mail.stalker.com>.
>>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To
>>> switch to
>>>> the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>>>> To switch to the INDEX mode, E-mail to
>>>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>>>> <CGatePro-request@mail.stalker.com>
>>> #############################################################
>>> This message is sent to you because you are subscribed to  the
>>> mailing list <CGatePro@mail.stalker.com>.
>>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com>
>To switch
>>> to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>>> To switch to the INDEX mode, E-mail to
>>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>>> <CGatePro-request@mail.stalker.com>
>>>
>>
>> #############################################################
>> This message is sent to you because you are subscribed to
>>   the mailing list <CGatePro@mail.stalker.com>.
>> To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To switch
>> to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>> To switch to the INDEX mode, E-mail to
>> <CGatePro-index@mail.stalker.com> Send administrative queries to
>> <CGatePro-request@mail.stalker.com>
>
>--
>Best regards,
>Dmitry Akindinov
>
>=======================================================================
>When answering to letters sent to you by the tech.support staff, make
>sure the original message you have received is included into your
>reply.
>
>
>#############################################################
>This message is sent to you because you are subscribed to
>  the mailing list <CGatePro@mail.stalker.com>.
>To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To switch to
>the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
>To switch to the INDEX mode, E-mail to
><CGatePro-index@mail.stalker.com> Send administrative queries to
><CGatePro-request@mail.stalker.com>
>
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster