Mailing List CGatePro@mail.stalker.com Message #92427
From: Technical Support <support@stalker.com>
Subject: Re: Linksys SPA3102 (Success!)
Date: Mon, 03 Sep 2007 22:16:16 +0400
To: CommuniGate Pro Discussions <CGatePro@mail.stalker.com>
Hello,

freddy.frouin@bt.com wrote:
Hello everyone,

Well, I'm interested with what you said in this thread, I'd like to get more details about it. Where you able to manage all your calls, incoming and outgoing calls, from a CGPro account ?

I'm now able to place and receive calls from the LINE1 RJ11 port. I'm able as well to forward incoming calls to LINE1 to an SIP account on the CGPro server using the User LINE1 settings. Yet, I'm still unable to place a call from a SIP/CGPro account to the SPA3102.

Note that the FXS account in Sipura 3102 uses a different port number by default (5061, if my memory serves). You need to relay requests from CGPro (better - through gatewaycaller script) to that port. Sending request on the standard port 5060 would give you some error (403 Forbidden, I believe.)

I tried to configure the WAN interface instead of using the LAN one, because I finished to think the SIP gateway was maybe only available on the WAN interface... ? I do not need to use the WAN interface 'cause I already have another router... But when I switch to the WAN interface, the management interface is no more available, neither in HTTP, nor in HTTPS...

That's on WAN settings page (which you need to access while connected through the LAN port): Enable WAN Web Server: -- set that to yes. And we connect the device to the office network through its WAN port.

Any help would be appreciated,
Best Regards, Freddy.
-----Original Message-----
From: CommuniGate Pro Discussions [mailto:CGatePro@mail.stalker.com] On Behalf Of Ifan Jones
Sent: lundi 13 août 2007 12:34
To: CommuniGate Pro Discussions
Subject: Re: Linksys SPA3102 (Success!)

I just completed a successful pstn - SIP call through the SPA 3102

The SPA has two network ports as it has a built in router - I didn't need this so I enabled the WAN side (marked inernet) management, assigned a static IP, and disconnected the LAN side (marked ethernet), and hey presto everything came to life!

I'll be documenting this soon and will post my settings and configs for others to use.

Regards

Ifan Jones
Solet Ltd

w: www.solet.co.uk
e: ifan@solet.co.uk
t: 08701995007

sip: 201@soletsupport.co.uk

On Monday, Aug. 13, 2007 at 8:22
 "Ifan Jones"  wrote:

:-)  I agree - the doumentation is awful, perhaps once we get
these working we should provide a guide!
Ifan Jones
Solet Ltd

w: www.solet.co.uk
e: ifan@solet.co.uk
t: 08701995007

sip: 201@soletsupport.co.uk

On Monday, Aug. 13, 2007 at 8:33
 freddy.frouin@bt.com wrote:

So, I finally tried it but not successfully for the moment:
- I had some problem to connect it to the french PTSN,
if someone has any details about this, would be interesting. It's maybe a boring issue, don't know...
- I don't find out detailed documentation about the
SPA3102. Manufacturer documentation is really poor compared to all available options.
- I was able to make it authenticate using SIP to CGPro
server. But then, I would like another users of the CGP server to be able to access the PTSN through this user, but I still don't know if it will be possible to do so.
- My first idea was to access the SPA3102 as a media
gateway configuring an SIP gateway in CGPro and to route calls to it, but from what I look to understand of the SPA3102 config I think it's a wrong way, it won't allow such configuration. Did someone ever tried this ?
Thanks,
Best Regards, Freddy.

-----Original Message-----
From: CommuniGate Pro Discussions
[mailto:CGatePro@mail.stalker.com]
On Behalf Of Ifan Jones
Sent: mercredi 8 août 2007 18:54
To: CommuniGate Pro Discussions
Subject: Linksys SPA3102

Hi All

This is the newer version of the SPA3000 - anyone here had
the honour of setting one up for CGPro?


Ifan Jones
Solet Ltd

w: www.solet.co.uk
e: ifan@solet.co.uk
t: 08701995007

sip: 201@soletsupport.co.uk

#############################################################
This message is sent to you because you are subscribed to
 the mailing list <CGatePro@mail.stalker.com>.
To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com>
To switch
to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
To switch to the INDEX mode, E-mail to <CGatePro-index@mail.stalker.com> Send administrative queries to  <CGatePro-request@mail.stalker.com>

#############################################################
This message is sent to you because you are subscribed to
 the mailing list <CGatePro@mail.stalker.com>.
To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To switch to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
To switch to the INDEX mode, E-mail to <CGatePro-index@mail.stalker.com> Send administrative queries to  <CGatePro-request@mail.stalker.com>
#############################################################
This message is sent to you because you are subscribed to
 the mailing list <CGatePro@mail.stalker.com>.
To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To
switch to
the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
To switch to the INDEX mode, E-mail to <CGatePro-index@mail.stalker.com> Send administrative queries to  <CGatePro-request@mail.stalker.com>
#############################################################
This message is sent to you because you are subscribed to
 the mailing list <CGatePro@mail.stalker.com>.
To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com> To switch to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
To switch to the INDEX mode, E-mail to <CGatePro-index@mail.stalker.com> Send administrative queries to  <CGatePro-request@mail.stalker.com>


#############################################################
This message is sent to you because you are subscribed to
  the mailing list <CGatePro@mail.stalker.com>.
To unsubscribe, E-mail to: <CGatePro-off@mail.stalker.com>
To switch to the DIGEST mode, E-mail to <CGatePro-digest@mail.stalker.com>
To switch to the INDEX mode, E-mail to <CGatePro-index@mail.stalker.com>
Send administrative queries to  <CGatePro-request@mail.stalker.com>

--
Best regards,
Dmitry Akindinov

=======================================================================
When answering to letters sent to you by the tech.support staff, make
sure the original message you have received is included into your reply.

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster